The AAF ashing furnace range is designed specifically to provide optimum ashing conditions to ensure complete combustion of the sample.
The AAF 11/3 & AAF 11/7 ashing furnaces provide a continuous flow of preheated air through the chamber, and are designed to comply with ISO 1171:2010, ASTM D3174-04: 2010 and ASTM D4422.
1100 ℃ maximum operating temperatures
PID301标准控制器,单段程序控制
Large floor area allows for large numbers of samples
适用于食品、塑料、煤料和其他碳氢化合物
Designed to comply with ISO 1171:2010, ASTM D3174-04:2010 and ASTM D4422
硬质氧化铝耐磨内衬避免加热元件受到化学侵蚀和机械冲击
4 sided heating (2 sides, roof & hearth)
Air inlet & tall chimney give airflow of 4 to 5 changes per minute
低烟囱保证气流最大程度接近样品,优化燃烧效率
采用大功率加热元件补偿高气流导致的热量损失
空气预热后进入炉膛,确保良好的温度均匀性
Sample tray and loading handle
AAF 11/7提供两相电
过温保护
A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
内容可能会被修改或更正。
AAF 11/3
最高温度(℃) | 1100 |
加热时间(mins) | 155 |
最高持续工作温度 | 1000 |
尺寸: 内部 高 x 宽 x 纵深 (mm) | 90 x 150 x 250 |
尺寸: 外部 高 x 宽 x 纵深 (mm) | 585 x 375 x 485 |
尺寸: 炉门开启时外部尺寸高 x 宽 x 纵深 (mm) | 800 x 375 x 485 |
尺寸: 与烟囱同高(mm) | 780 |
体积 (L) | 3 |
最大功率 (W) | 2100 |
持续功率 (W) | 1270 |
热电偶种类 | K |
重量 (kg) | 22 |
最高温度(℃) | 1100 |
加热时间(mins) | 155 |
最高持续工作温度 | 1000 |
尺寸: 内部 高 x 宽 x 纵深 (mm) | 90 x 170 x 455 |
尺寸: 外部 高 x 宽 x 纵深 (mm) | 650 x 430 x 740 |
尺寸: 炉门开启时外部尺寸高 x 宽 x 纵深 (mm) | 905 x 430 x 740 |
尺寸: 与烟囱同高(mm) | 1060 |
体积 (L) | 7 |
最大功率 (W) | 4000 |
持续功率 (W) | 2624 |
热电偶种类 | K |
重量 (kg) | 63 |
请注意:
- Holding power is measured at 500°C
- Heat up rate is measured to 100°C below max, using an empty chamber
- Maximum power and heat up times based on a 240V supply
内容可能会被修改或更正。